Incubators

Back to category page

Refrigerated Incubators (+5°C to +70°C)

0
0

Our ICP compressor-cooled incubator offers great results whenever a rapid and precise changeover between heating and cooling phases in ramp operation is required. Due to the finely tuned control technology, temperatures exactly reach the setpoint values without the need for energy-intensive bursts of power.

  • Temperature range from 5 to 70 ℃
  • 5 model sizes 55, 110, 260, 450, 750
  • State-of-the-art control technology based on the P performance class for all models
  • Double doors standard for all models: Prevention of contamination and drops in temperature, and at the same time an optimum view of the sensitive load through wide-area interior glass doors
  • Day/night simulation (24-hour cycle) programmable in conjunction with interior lighting (optional)
  • Very good air circulation in the working chamber through sophisticated ventilation technology
  • Intelligent defrosting function


Download Brochure

Incubating, breeding, cooling - the cooled incubator for biology, zoology, botany, bacteriology...


The air jacket temperature control system ensures that the working chamber is perfectly sealed off from the outside. The advantages: rapid and precise temperature control, no evaporator-related drying out of samples, no icing of the cooling unit, no de-humidification of the inner chamber.

With the help of our model selection, you can find the right model for your needs, with dimensioned model sketches and extensive technical data for download.

For work predominantly close to the ambient temperature, the extremely energy-saving Memmert Peltier-cooled incubator IPP is recommended. If you just want to store samples in biology, biotechnology, the pharmaceutics or food industry, specifically over long periods and at constant temperatures, we we recommend our IPS storage chamber with a chamber volume of 749 litres.

Stainless steel - a cooled-incubator (almost) for ever


60 years of permanent development work, as well as numerous amounts of feedback from practical experience, are embodied in each of our appliances:

  • The modular manufacturing concept in accordance with the principle of equal parts enables a highly varied and cost-effective production
  • Almost exclusive use of high-quality, corrosion-resistant and easily cleanable stainless steel for the working chamber and housing
  • Heating concept adapted to the specific product for a precise and homogenous temperature control independent of chamber volume and load
  • A wide range of options for programming and documentation using interfaces, Celsius software, integrated log memory and chip cards (features dependent on the controller class)
  • Three-year guarantee for appliances except wear and tear parts
  • The temperature values of all cooled incubators are measured according to DIN 12880:2007-05

MODELS
CAPACITY (LITERS)
CAPACITY (cu. ft.)
INTERIOR DIMENSIONS
W x H x D (mm)
EXTERIOR DIMENSIONS
W x H x D (mm)
PRODUCT DATA SHEET
WITHOUT HUMIDITY CONTROL
IPP 30
32
-
400 x 320 x 250
585 x 704 x 524
IPP 55
53
-
400 x 400 x 330
585 x 784 x 604
IPP 110
108
-
560 x 480 x 400
745 x 864 x 674
IPP 260
256
-
640 x 800 x 500
824 x 1183 x 774
IPP 750
749
-
1040 x 1200 x 600
1224 x 1726 x 874
ICP 55
53
-
400 x 400 x 330
585 x 1153 x 514
ICP 110
108
-
560 x 480 x 400
745 x 1233 x 584
ICP 260
256
-
640 x 800 x 500
824 x 1552 x 684
ICP 450
449
-
1040 x 720 x 600
1224 x 1613 x 784
ICP 750
749
-
1040 x 1200 x 600
1224 x 1950 x 784
WITH HUMIDITY CONTROL
HPP 110
108
-
560 x 480 x 400
745 x 864 x 674
HPP 260
256
-
640 x 800 x 500
824 x 1183 x 774
HPP 750
749
-
1040 x 1200 x 600
1224 x 1726 x 874